Jetting Package

(No reviews yet) Write a Review
MSRP: $89.00
Was: $89.00
Now: $84.00
(You save $5.00 )
Usually Ships in 24 to 48 Hours

Product Overview

This Jetting solution for a Pre-Filter equipped 950 Adventure, Super Enduro, Super Moto. This jetting package REQUIRES a PREFILTER to function properly! If you have a prefilter already, then this is the correct package. However if you do not have a prefilter, depending upon your needs, then either a JP1002, JP1003 or a JP1004 is the correct selection. Includes 2 specific length hoses to vent the carburetor bowls that replaces the Y.

Independent review and dyno run of a customer: So, the purple graph is my 950 this morning, before the installation of the prefilter and jet kit. The carbs at this point are stock with the exception of the needles being in the third position. Bike is de-smogged and has FMF slip ons. The torque dip at 3000 RPM was no surprise and matched seat of the pants experience. The green graph is 4 hours later today, after completing the prefilter, jet kit, and carb cleaning. Apart from the included jets, no other modifications were made. Needles were retained in the third position. Maximum HP was reduced by 1 HP and max torque increased by 0.2 lb/ft. The increase and smoothing of the torque curve at 3000 RPM is very noticable while riding.

From dynoChart


(No reviews yet) Write a Review