Jetting Package & Pre-Filter & FlexJet2

(No reviews yet) Write a Review
MSRP: $227.00
Was: $227.00
Now: $212.72
(You save $14.28 )
Usually Ships in 24 to 48 Hours

Out of stock, More on the Way!

Product Overview

This is the Jetting, Pre-Filter AND FlexJet2 solution for the 950 Adventure, Super Enduro, Super Moto. Includes 2 specific length hoses to vent the carburetor bowls that replaces the Y. Requires OEM airbox to use the foam prefilter to replace OEM snorkel. Will not work for other applications.
Idle Mixture Fuel screw (IMS) adjustments can be a time consuming project. Once installed, R&D Flex-Jet2 makes tuning a simple and easy project. With the Flex-Jet2, Idle Mixture adjustments are now at your fingertips! If you ride from your garage elevation up or down, across a pass or your favorite place to ride that is 3-4k feet different, proper tuning is now quick and easy!

Independent review and dyno run of a customer: So, the purple graph is my 950 this morning, before the installation of the prefilter and jet kit. The carbs at this point are stock with the exception of the needles being in the third position. Bike is de-smogged and has FMF slip ons. The torque dip at 3000 RPM was no surprise and matched seat of the pants experience. The green graph is 4 hours later today, after completing the prefilter, jet kit, and carb cleaning. Apart from the included jets, no other modifications were made. Needles were retained in the third position. Maximum HP was reduced by 1 HP and max torque increased by 0.2 lb/ft. The increase and smoothing of the torque curve at 3000 RPM is very noticable while riding.

From dynoChart


(No reviews yet) Write a Review